Plumbing Tips And Guide For New Homeowners
There are many general plumbing tips for first-time homeowners that can be learned with the click of a button. However, not all of these tips will work in every situation. A local plumber can cost anywhere from $150 to over a thousand dollars, which is why so many homeowners try their hand at plumbing themselves. For this reason, it is important to keep your eyes open and pay attention to what is happening around you when DIY plumbing. If you find yourself stuck on something or just want some advice, do not hesitate to contact “general plumbing services near me”. Ferrari Plumbing can help you with all your plumbing needs. To find out if our plumbing services suit your goals, you can see the reviews on our website.
Have any questions about our plumbing services? Read our FAQ Section.
Here Are Several Plumbing Tips:
1. Flush The Toilet With Water In A Bucket
If you have trouble flushing, don’t worry. If your toilet flush is not working, you don’t need to run around the neighborhood looking for a toilet. Pour half a bucket of water down the toilet and flush it. Using this method, you can clean the toilet. You cannot refill the toilet with water using this method.
2. Plunges Are Useful For Unclogging Drains
To prevent soap, debris, and hair from getting into the drains, use strainers. If they get into the drains, they can clog them. Use a plunger if the drain gets blocked so you can remove all the particles and water. You can use a plunger to unclog the sink. If your sink is blocked with water and particles, you can also open the bottom to drain the water. If you keep a bucket under the sink, the water will drain into the bucket instead of the bathroom floor.
3. Have A Set Of Hex Keys On You At All Times
Hex/Allen keys are necessary for DIY plumbing. They are very useful for tightening small nuts and bolts. To meet different needs, these keys are available in square, hexagon, and small, medium, and large sizes. In addition to being useful for plumbing, these keys can also be used for other purposes.
4. The Where-And-How Of Shutting Off The Main Gas Or Water Valve
Gas and water leaks require that you know where to turn off the main switch to control water flow into the pipes, and the same goes for gas leaks; know where to turn off the gas valve. This can be useful if there is a leak in your pipes. It may be necessary to replace a rotten pipe. You can perform the work yourself or hire a professional.
5. Keeping A Plumbing Kit Handy Is Always A Good Idea
Plungers should be included in a plumbing kit as well as duct tape to fix stubborn leaks, heavy-duty paper rolls to remove leaks and dirt, and a screwdriver for multiple plumbing purposes.
6. Check For Leaks At All Times
After every plumbing project, check for leaks by running water through the system, then opening and closing all valves and drains. Even professional plumbers may miss a small leak and need to reseal a connection.
7. Pipes Shouldn’t Be Punctured
Are you planning on drilling holes or pounding nails into your walls, floors, or ceilings? You do not want to accidentally puncture any of the supply or drainage pipes that are behind your work area. With an inexpensive stud finder, you can locate pipes behind walls. Another option is to invest in an endoscopic camera that can be snaked into the wall.
8. Garbage Shouldn’t Be Flushed Down The Drain
It is a bad idea to dump things down the drain like coffee grounds, food debris, bacon grease, vegetable peelings, or starchy foods like rice and potatoes since these items will clog your pipes. If you have a garbage disposal, you should read its manual to find out what it can handle
9. Do Not Overtighten Your Fittings
DIY plumbing mistakes are often caused by overtightening connections or fittings, which leads to stripped screws and broken bolts. Keep this adage in mind: “hand-tight is just right.”
10. Become Friends With Plumber’s Tape
To prevent leaks around connections and fittings, plumber’s tape (also known as Teflon tape) seals pipe threads. Sealing the pipe threads typically requires three wraps of plumber’s tape. White tape is often used for plumbing projects around the house, while yellow tape is used for connecting gas lines.
We hope this list of DIY plumbing tips has given you an idea of what to expect when it comes to your home’s pipes. You can also use these tips for any future homes that you might purchase in the future, so stay tuned! These are just a few examples of how plumbing issues can be fixed without calling in professionals. With some research and patience on your part, no problem will seem insurmountable.
You can contact us today here: (630) 260-5898